Loading...
Serving Miami, FL and surrounding areas. (786) 435-9567
Your Miami concrete slab deserves more than bare gray. We install moisture-tested metallic epoxy floors that look sharp and hold up to South Florida heat and humidity for years.
Metallic epoxy flooring in Miami is a thick, seamless coating poured over your existing concrete slab that hardens into a high-gloss surface with swirling, three-dimensional color effects - most residential and garage projects are completed within two to three days, with the floor ready for light foot traffic within 24 hours of the final coat.
If you have an aging garage, a bonus room, or a covered patio that sees daily use, bare concrete is working against you. It absorbs stains, holds moisture, and looks unfinished no matter how clean it is. Metallic epoxy changes all of that with one installation. Many Miami homeowners pair it with Urethane Cement Flooring for utility spaces that take heavy abuse.
The key difference between a floor that lasts and one that peels in 18 months is what happens before the coating goes down. In Miami, moisture testing is not optional - it is the first step every time.
If your concrete has oil stains, tire marks, or rust spots that will not clean up no matter what you use, the surface is unprotected and absorbing everything. Bare concrete is porous - it soaks up spills and gets harder to clean over time. A metallic epoxy coating seals the surface completely so spills wipe up instead of soaking in.
In Miami, moisture rising up through concrete slabs is extremely common, and one of the first visible signs is a white, powdery residue on the surface - sometimes called efflorescence. This signals that moisture is actively moving through your slab. Any coating applied without first addressing this will eventually fail, so a moisture test comes before anything else.
If a previous painted or epoxy-coated floor is lifting at the edges or flaking off in patches, the original coating was not properly bonded to the concrete - often because moisture was not addressed. A complete removal and proper metallic epoxy installation fixes the problem for good rather than papering over it.
Miami homeowners use garages, covered patios, and bonus rooms as year-round living spaces for entertaining, working out, or home offices. If you are updating one of these spaces and want a floor that looks sharp and handles daily traffic, metallic epoxy is worth a serious look. It works equally well in a garage, a home gym, or a stylish living area.
We install metallic epoxy floors across the full range of residential and light commercial applications in the Miami area. Every project starts with a moisture test and diamond grinding - two steps that are not negotiable if you want a floor that lasts. From single-color swirl patterns in a garage to multi-tone custom designs in a home showroom, we match the finish to the space and the conditions of your specific slab. Homeowners who want a similar high-performance finish with even faster cure times sometimes consider our Urethane Cement Flooring option, while those looking for a classic solid-color system typically go with our standard Epoxy Floor Coatings.
We work on garages, living rooms, home gyms, showrooms, and covered patios. If the surface is concrete and it is in Miami-Dade County, we can coat it. Every installation includes a final walkthrough and care instructions so you know exactly how to get the most out of your new floor.
Best for homeowners who want a clean, durable, easy-to-maintain garage floor that handles vehicles, tools, and spills without staining.
Ideal for Miami homeowners upgrading a home gym, art studio, or open-plan living area where both aesthetics and durability matter.
A solid choice for semi-exposed Miami spaces that deal with heat, humidity, and rain while still needing to look sharp year-round.
Suited for spaces where a high-gloss, professional-looking floor creates an impression - without the maintenance demands of polished stone.
Miami sits near sea level with one of the highest average humidity levels in the continental United States. That moisture does not just hang in the air - it pushes up through concrete slabs from the ground below. Any contractor who skips a moisture test before applying epoxy is setting the floor up to fail within months. Experienced Miami installers schedule work for early morning hours during the cooler months - roughly October through April - to avoid the surface temperatures and humidity levels that cause coatings to cure unevenly. The U.S. Environmental Protection Agency recommends good ventilation during epoxy application, and in Miami that means early-morning scheduling and proper airflow every time.
The vast majority of Miami homes - from older properties in Coral Gables, FL to newer builds out in Kendall, FL - are built on concrete slabs rather than wood subfloors. That means there is no need to install a subfloor first, but older slabs from the 1950s through 1970s often have surface imperfections, old adhesive residue, or minor cracks that need attention before any coating goes down. We handle that prep work as part of every installation.
Reach out by phone or the contact form and describe your space. We reply within one business day and schedule a free in-home estimate where we can see the concrete in person before quoting anything.
At the estimate visit we test your slab for moisture - especially important in Miami given the water table - and check for cracks, old coatings, and surface condition. This shapes the quote and the prep plan. No surprises later.
The crew diamond-grinds the concrete to open its pores for a strong bond, fills any cracks or chips, and cleans the surface thoroughly. This step takes most of the first day and is the foundation of everything that follows.
The metallic base coat and pigment layer go down on day two, followed by a clear topcoat sealer. After 24 hours for light traffic and five to seven days for vehicles, we do a final walkthrough and leave you with care instructions.
No commitment required. We reply within one business day and come to you for the assessment.
(786) 435-9567South Florida's water table means nearly every slab holds moisture to some degree. We test before we touch anything - and if treatment is needed, we do it first. That is the only way to guarantee the floor stays bonded.
We carry full licensing and insurance for concrete flooring work in Florida. That matters for your protection and for HOA or condo board approval requirements that are common in Miami's residential communities.
Acid etching is a shortcut that does not open the concrete pores deeply enough for a lasting bond. We use diamond grinding on every project - the same standard recommended by the American Concrete Institute for coating applications.
Miami's home improvement market fills up fast once hurricane season ends in November. We offer flexible scheduling year-round, including early-morning installation slots that work best for epoxy application in South Florida's climate.
Every one of these details comes together on installation day. When the prep is done right and the conditions are managed, you get a floor that looks exactly as good in five years as it does the day we leave.
A moisture-tolerant, seamless coating built for Miami garages, laundry rooms, and utility spaces that take heavy daily use.
Learn MoreClassic solid-color epoxy floor systems for garages, basements, and commercial spaces across Miami-Dade County.
Learn MoreSpots fill up fast from October through March - reach out now to secure your preferred install date.