Loading...
Serving Miami, FL and surrounding areas. (786) 435-9567
Your floor is failing because the last contractor skipped moisture testing. We fix that. A properly installed epoxy coating stays sealed through Miami summers and cleans up in minutes after a storm.
Epoxy floor coatings in Miami seal and protect concrete surfaces by chemically bonding a hard resin layer to the slab, covering most residential garage and utility floors in one to two days of work with several additional days needed before full use.
Most Miami homeowners come to us after a previous coating failed - bubbling up at the edges or peeling in sheets because whoever installed it did not address the moisture moving up through the slab from below. Miami sits on porous limestone with a high water table, so skipping a moisture test is the fastest way to get a floor that looks fine in October and starts lifting by March. Beyond the garage, epoxy coatings work well in laundry rooms, covered patios, and any utility space where spills and humidity are daily facts of life. If you are also considering a decorative finish, our metallic epoxy flooring option adds visual depth with the same durable base.
A chalky white residue or a surface that feels slightly damp even when it has not rained is moisture pushing up through the slab from below. This is especially common in Miami because of the city's high water table and porous limestone bedrock. An epoxy coating applied after proper moisture testing can seal the surface and stop that cycle.
Bare concrete is porous, and once oil, rust, or chemicals soak in, they are nearly impossible to scrub out completely. If your garage floor looks permanently stained no matter how much you clean it, an epoxy coating covers those blemishes and gives you a surface that wipes clean in seconds.
If small chunks of concrete are breaking off or you notice fine gray dust that comes back no matter how often you sweep, the surface is deteriorating. This kind of breakdown is accelerated in Miami by the combination of heat, humidity, and salt air. Coating the floor now while the damage is still surface-level is far less expensive than waiting until the slab itself needs repair.
If a past coating is lifting at the edges or bubbling in the middle, the original job was not done correctly - most likely because the surface was not prepared properly or moisture was not addressed. This is fixable, but it requires stripping the old coating completely before a new one goes down. Do not let a contractor apply a new coat directly over a failing one.
Most residential epoxy projects use a multi-coat system: a base coat applied to the prepared concrete, an optional broadcast layer of decorative color chips, and a clear protective topcoat. Each coat adds thickness and durability. For homeowners who want a bold, one-of-a-kind look, our metallic epoxy flooring uses pearlescent pigments to create a three-dimensional, flowing pattern that is genuinely different in every space. For larger properties or business use, our commercial and industrial epoxy floor coatings are designed for the heavier traffic and stricter cleaning requirements those spaces demand.
We also offer anti-slip texture additives, UV-resistant topcoats for covered outdoor spaces, and moisture-mitigation primer systems for slabs that test positive for elevated moisture - which is a common situation in Miami given the high water table. The right system for your floor depends on how the space is used, the current condition of the concrete, and your finish preference.
The most common choice for garages and utility rooms - clean, consistent, easy to maintain, and available in a wide range of colors.
Colored flakes broadcast over a base coat before the topcoat seals them in. Adds visual texture, hides minor imperfections, and is popular for garages that double as work or recreation spaces.
Best suited for homeowners who want a showroom-quality, decorative floor with a unique flowing pattern - common in home gyms, showrooms, and high-end garages.
Formulated with UV-resistant topcoats for covered outdoor spaces. A popular upgrade for Miami homes with covered patios that see year-round use.
Miami's combination of year-round heat, humidity that regularly sits above 70%, and a high water table creates conditions that are genuinely harder on uncoated concrete than most other cities in the country. The porous limestone beneath Miami's slabs allows moisture to travel upward through concrete year-round, not just during the rainy season. Salt air from Biscayne Bay and the Atlantic accelerates surface breakdown on any unprotected concrete within a few miles of the coast. A properly installed epoxy coating acts as a barrier against both, slowing the process and reducing how often a floor needs repair or resurfacing. Homeowners in Coral Gables and Kendall especially deal with HOA requirements and older concrete slabs that benefit most from a sealed surface.
Hurricane season is another practical reason Miami homeowners invest in coated floors. After a storm brings in debris, mud, or standing water, a smooth epoxy surface cleaning takes minutes instead of hours. Many homeowners store generators, gas cans, and emergency supplies on their garage floors for months at a time - and bare concrete stains permanently from those kinds of spills. A coated floor handles it all and wipes clean without scrubbing.
We respond within one business day. We ask a few basic questions about your space, then schedule a free on-site visit. We do not quote firm prices over the phone because the condition of the concrete changes what the job actually involves.
We look at the concrete's condition, check for cracks, existing sealers, and signs of moisture. In Miami, moisture testing is not optional - we perform it on every job because the high water table makes moisture-related failures the most common problem we see.
The crew grinds or acid-washes the concrete to open the surface so the coating bonds properly. We fill cracks, remove oil stains, and make sure the floor is completely clean and dry. This step takes most of the first day and is the single biggest factor in how long your floor will last.
We apply the coating in layers - base coat, optional decorative chips, and clear topcoat. Before we leave, we walk you through the finished floor and give you written care instructions. Light foot traffic is fine within 24 hours; plan to wait a full week before parking a vehicle.
We give you a written quote after seeing the floor in person - no surprises on the invoice and no guessing on the timeline. We respond within one business day.
(786) 435-9567We test every slab for moisture before we apply anything. This step is frequently skipped by contractors who are moving fast, and it is the single most common reason epoxy floors fail in Miami. Addressing moisture upfront means the coating bonds properly and stays bonded through Miami's humid summers and heavy rainy seasons.
Florida requires all contractors working on residential properties to hold a state license you can verify in about two minutes through the Florida DBPR license lookup tool. We hand over our license number before you sign anything.
You get a written quote that covers all prep steps, the number of coats, and the products being used - before any work begins. The price on that quote is the price on your invoice. Miami's contractor market has a reputation for estimates that shift after the job starts; ours do not.
Salt air, high water tables, HOA requirements, and hurricane-season prep are not abstract concerns for us - they are the conditions we work around on every Miami job. We use coating systems and scheduling practices suited to South Florida, not products designed for a dry-climate warehouse.
The combination of proper moisture testing, thorough surface prep, and products chosen for Miami's specific climate is what separates a coating that holds for years from one that starts lifting after the first rainy season. That is the standard we hold every job to.
Heavy-duty epoxy systems built for warehouses, restaurants, auto shops, and other commercial spaces that need floors rated for constant traffic and harsh cleaning chemicals.
Learn MoreDecorative epoxy with pearlescent pigments that create a flowing, three-dimensional pattern - a showroom-quality finish for garages, gyms, and high-end interiors.
Learn MoreWe are booking jobs now. Lock in your date before the winter installation season fills up - this is the best time of year to get South Florida epoxy work done right.